Home
»
Motorcycles
»Listing #18011219
$7,600.00
1976 Kawasaki KZ900A4 Fully Restored
Posted Jul 07, 2024 | Hits
Country:
USA
Region:
SC
Make:
Kawasaki
City:
Columbia
Zip:
29201
Model:
KZ900A4
Year:
1976
Mileage:
13400
Miles
Color:
Green
Condition:
Used
Engine:
904
cc
This is a fully restored, completely rebuilt bike that is better than new. This was my dream bike as a teen so I decided to restore one where everything was either made better than, or replaced with new. No expense was spared.
The frame and all black metal parts are powder coated. The chrome has been re-plated using a correct 3-stage process that is extremely expensive due to EPA regulations. The chroming of the wheel rims alone cost $250 each.
The spokes are stainless steel.
New tires and inner tubes.
All nuts and bolts that weren't chrome were bright nickel plated
All aluminum parts were vapor blasted.
Bored out to 1mm over with new pistons and rings.
All bearings, seals, gaskets replaced. Needle bearings in the swing arm, tapered head bearing.
New wiring loom, Dyna-S ignition, new (improved) regulator/rectifier.
All new cables.
New carb kit, balanced and synced.
Brand new pattern exhaust system with double-walled headers.
New valve guides, cam chain and camshaft bearings.
New AGM battery.
The only part that is different is the twin drilled front discs with calipers mounted behind the forks. Vastly improved braking. Fully restored calipers with new seals, pistons and pads.
New drive chain and sprockets.
Original frame, tank, body work, wheels, handlebars, gauges, seat, engine.
The frame and all black metal parts are powder coated. The chrome has been re-plated using a correct 3-stage process that is extremely expensive due to EPA regulations. The chroming of the wheel rims alone cost $250 each.
The spokes are stainless steel.
New tires and inner tubes.
All nuts and bolts that weren't chrome were bright nickel plated
All aluminum parts were vapor blasted.
Bored out to 1mm over with new pistons and rings.
All bearings, seals, gaskets replaced. Needle bearings in the swing arm, tapered head bearing.
New wiring loom, Dyna-S ignition, new (improved) regulator/rectifier.
All new cables.
New carb kit, balanced and synced.
Brand new pattern exhaust system with double-walled headers.
New valve guides, cam chain and camshaft bearings.
New AGM battery.
The only part that is different is the twin drilled front discs with calipers mounted behind the forks. Vastly improved braking. Fully restored calipers with new seals, pistons and pads.
New drive chain and sprockets.
Original frame, tank, body work, wheels, handlebars, gauges, seat, engine.