1984 Toyota Tacoma SR5 Pickup Truck 4x4 Manual

This 1984 Toyota SR5 4×4 pickup
The truck is finished in blue and white over a gray and blue cloth interior, and a carbureted 2.4-liter 22R inline-four is paired with a five-speed manual transmission and a dual-range transfer case. Features include a camper shell, a 2? suspension lift, Bilstein shock absorbers, a sunroof, air conditioning, and a factory stereo with an equalizer. During my ownership, the brakes and suspension have been serviced, the valves have been adjusted, and the timing belt, water pump, and air conditioning components have been replaced. This Toyota pickup shows just over 108k miles and is offered with manufacturer’s literature, warranty paperwork from 1983, service records, a clean title.
The truck is finished in Medium Blue/White (2M2) and features chrome bumpers and trim as well as a sunroof, a sliding rear window, a power antenna, and a Gem Top camper shell. There are notes rust is present in the bed and on a pinch weld near the left quarter panel.
Chrome 15? wheels are mounted over manually locking front hubs and wear 31 x 10.50? BFGoodrich All-Terrain KO2 tires. The suspension has been lifted with aftermarket rear shackles and Bilstein 5100 monotube gas shock absorbers. A brake master cylinder from a V6 model, vented rotors from an FJ80, and stainless steel brake lines have been installed. The axle seals, wheel bearings, brake pads, and rear wheel cylinders were replaced in 2018.
The cab is equipped with bucket seats trimmed in gray cloth with light blue patterned inserts along with two-tone door panels and a blue dashboard. Additional amenities include electric windows, air conditioning, and a factory stereo with an equalizer and aftermarket LED lighting. The air conditioning system utilizes R12 refrigerant, and the receiver drier, compressor, evaporator valve, hoses, and belt have been replaced.
The carbureted 2.4-liter 22R inline-four was rated at 97 horsepower at 4,800 rpm and 128 lb-ft of torque at 2,800 rpm when new. The following work has been performed between 2018 and 2020:
Valve adjustment
Replacement timing chain, guides, and camshaft gear
Replacement water pump and coolant hoses
Replacement radiator, fan and fan clutch
New distributor, coil, ignition wires, and spark plugs
Billet camshaft seals installed
Replacement accessory belts and tensioner pulley bearing
New oil pan seal
2¼ mandrel-bent cat-back exhaust system with a Magnaflow muffler installed
Power is delivered to the rear or all four wheels through a five-speed manual transmission and a dual-range transfer case. The trunnion bearings, transfer case output seals, differential seals, and axle breathers have also been replaced.